Must 5.2kva Inverter Aokly 5kwh LIthium Battery 4 x SunPro 410W BI-Facial Solar Panel
Must 5.2kva Inverter Aokly 5kwh LIthium Battery 4 x SunPro 410W BI-Facial Solar Panel
Description
-
Must 5.2kva Inverter Aokly 5kwh Lithium Battery 4 x Sunpro 410W BI-Facial Solar Panel
Hybrid Inverter 48V 5.2KVA / 5000W 100A MPPT Solar Inverter -MUST
PV1800PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
You can choose which priority you want to charge your loads / battery whether it Solar or Grid or both
Key Features- Pure sine wave output
- Built-in 80A MPPT solar charge controller
- MAX PV Array Open Circuit Voltage: 450V
- (do no support parallel)
- High Frequency
The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which can help you make full use of solar energy.
This inverter can provide power to the loads without a battery.Features:
- Pure sine wave output
- Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
- Built-in MPPT solar charge controller
- MAX PV Array Open Circuit Voltage: 450V
- Can provide the power to the load without battery
- Combining solar system, AC utility, and battery power source to supply continuous power
- Overload, short circuit and Deep discharge protection
- Cold start function
- Support USB, RS485 monitoring function
- WIFI remote monitoring (Purchase WIFI Dongle Separately)Specifications:
- Rated Power 5200VA/5200W
- Input Voltage 230 VAC
- Frequency Range 50 Hz/60 Hz (Auto sensing)Output
- AC Voltage Regulation (Batt. Mode) 230VAC 5 %
- Surge Power 10400W
- Efficiency (Peak) 93 %
- Transfer Time 10 Ms (For Personal Computers), 20 Ms (For Home Appliances)
- Waveform: Pure sine waveBattery & AC Charger
- Battery Voltage 48 VDC
- Floating Charge Voltage 54.8 VDC
- Overcharge Protection 60 VDC
- Maximum Charge Current 80 ASolar Charger
- Maximum PV Array Open Circuit Voltage 450 VDC
- Maximum Charging Current 80ADimensions: L 62cm X W 42cm X H 29cm
What's in the box
1 x Inverter
1 x User Manual- 1-Years Repair Warranty
-
Aokly Lithium Iron Phosphate (LIFEPO4) Battery
-
Longer Cycle Life: Offers up to 10 times longer cycle life and five times longer float/calendar life than lead acid battery, helping to minimize replacement cost and reduce total cost of ownership.
Lighter Weight: About 40% of the weight of a comparable lead acid battery. A 'drop in' replacement for lead acid batteries.
Higher Power: Delivers twice power of lead acid battery, even high discharge rate, while maintaining high energy capacity.
Wider Temperature Range: -20~60
Superior Safety: Lithium Iron Phosphate chemistry eliminates the risk of explosion or combustion due to high impact, overcharging or short circuit situation.
Electrical Characteristics:
Nominal Voltage: 48V
Nominal Capacity: 100Ah
Nominal Energy: 4800Wh
Cycle life: 3500 cycles @80%DOD @35 C
Months Self Discharge: 1%/MonthStandard Charge:
Recommended Charging Voltage: 56.8V
Recommended Charging Current: 20A
Max. Charging Voltage: 57.6V
Max. Charging Current: 100AStandard Discharge:
Recommended Discharging Current: 50A
Max. Pulse Current: 100A
Discharge Cut-off Voltage: 43.2VEnvironmental characteristics:
Charge Temperature: 0 55
Discharge Temperature: -20 60
Storage Temperature: 0 40
IP Rating: IP30What's in the box.
1 x Aokly AFLP-48100 Lithium Iron Phosphate (LIFEPO4) Battery5 x Year Warranty
-
Sunpro Power - SP410W BLACK FRAME MONO DOUBLE GLASS BIFACIAL
-
Warranties: -
5 Years Warranty
All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.