Must 5.2 Pro Hybrid Solar Inverter With ECCO LITHIUM ION PHOSPHATE 51.2V 100AH (WALL MOUNT)

Hybrid Inverter 48V 5.2KVA / 5000W 100A MPPT Solar Inverter -MUST

PV1800PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.

You can choose which priority you want to charge your loads / battery whether it Solar or Grid or both

• Pure sine wave output
• Built-in 80A MPPT solar charge controller
• MAX PV Array Open Circuit Voltage: 450V
• (do no support parallel)
• High Frequency

The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which can help you make full use of solar energy.
This inverter can provide power to the loads without a battery

Features:
- Pure sine wave output
- Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
- Built-in MPPT solar charge controller
- MAX PV Array Open Circuit Voltage: 450V
- Can provide the power to the load without battery
- Combining solar system, AC utility, and battery power source to supply continuous power
- Overload, short circuit and Deep discharge protection
- Cold start function
- Support USB, RS485 monitoring function
- WIFI remote monitoring (Purchase WIFI Dongle Separately)

Specifications:
- Rated Power 5200VA/5200W
- Input Voltage 230 VAC
- Frequency Range 50 Hz/60 Hz (Auto sensing)

Output
- AC Voltage Regulation (Batt. Mode) 230VAC 5 %
- Surge Power 10400W
- Efficiency (Peak) 93 %
- Transfer Time 10 ms (For Personal Computers), 20 ms (For Home Appliances)
- Waveform: Pure sine wave

Battery & AC Charger
- Battery Voltage 48 VDC
- Floating Charge Voltage 54.8 VDC
- Overcharge Protection 60 VDC
- Maximum Charge Current 80 A

Solar Charger
- Maximum PV Array Open Circuit Voltage 450 VDC
- Maximum Charging Current 80A

Dimensions: L 62cm X W 42cm X H 29cm

What's in the box
1 x Inverter
1 x User Manual

• 1-Year Repair Warranty

• Ecco Lithium-Ion Phosphate 51.2V 100Ah (Wall Mount)

  Ecco Lithium-Ion Phosphate 51.2v 100ah 5.12 KWh Battery LFELI-51.2 100AH (Wall Mount) is an energy storage module based on a home wall-mounted design. The system uses distributed photovoltaic and wind power generation to provide a household power supply solution. It can effectively realize energy transformation and storage, solve the imbalance between distributed generation and load, improve the stability and utilization rate of renewable energy generation, realize "spontaneous self-use" at the user end, and save electricity costs. The system uses high-efficiency and long-life lithium iron phosphate batteries, and the excellent battery management system can ensure its Design life of more than 15 years.

  Characteristics:

  - High energy density and conversion efficiency
  - Intelligent software anti-theft design
  - Compatible with many inverters
  - Easy maintenance with SOC (charge status) and SOH (health status) detection

  8000 cycles at a 50% DOD

  What's in the box
  1 x Ecco Lithium-Ion Phosphate 51.2v 100ah 5.12 KWh Battery LFELI-51.2 100AH (Wall Mount)

  Battery Cables & Communication Cable Included

  Size:

  59.4 x 51.8 x 28.2 cm

  36kg

  Battery Parameters:

  Battery Type is set to "USE."
  Bulk Charge Voltage is set to 56.4V.
  Float Charge Voltage is set to 54V.
  Cut Off Voltage is set to 44V.

  Warranties:

  5 Years Warranty
  All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.