ECCO Hybrid Inverter 3.5KVA 24V MPPT 100A And Ritar 25.6v 100ah Lithium LifePO4 2.56Kwh

Description

• Hybrid Inverter 24V 3.5 KVA / 3500W MPPT 100A Inverter Pure Sine Wave - Ecco
  
  
  The main difference between PWM and MPPT charge control devices is that the MPPT devices are more efficient. MPPT charge control devices have 30 % more efficient in charge efficiency according to PWM type. Panel voltage and battery voltage should be matched in PWM systems.
  
  

  High Voltage VDC500V
  3.5KVA/3500W 100A Pure Sine Wave Solar Inverter

  Features
  - Pure Sine Wave Solar Inverter
  - Output Power Factor 1
  - High PV Input Voltage Range (120VDC - 500VDC)
  - Built-in 100A MPPT Solar Controller
  - Supports Multiple Output Priority: UTL, SOL, SBU, SUB
  - Parallel Operation with Up to 12 units (Parallel Version)
  - Supports Parallel Operation in Single Phase/ 3 Phase (Parallel Version)
  - Supports Wireless Parallel, Without Extra Sharing of Current Cable
  - RS485 Communication for BMS
  - Battery Equalization Function to Optimise Battery Performance and Extended Lifecycle

  Specifications:

  Inverter Mode
  - Rated Power: 3500VA / 3500W
  - DC Input: 24VDC, 158A
  - AC Output: 230VAC, 50/60Hz, 23.5A

  AC Charger Mode
  - AC Input: 230VAC, 50/60Hz, 23.5A
  - DC Output: 27VDC
  - Max. Charge Current (AC): 60A Default 30A
  - Max. Charge Current (PV+AC): 100A
  - AC Output: 230VAC, 50/60Hz, 15.2A

  Solar Charge Mode
  - Max. PV Array Power: 4000W
  - Min. Solar Voltage: 120VDC
  - Max. Solar Voltage (VOC): 500VDC
  - Max. MPPT Charge Current: 100A.

  Ingress Protection: IP21 (Indoor Use)

  Dimensions; 38 x 55 x 20 cm
  Weight: 9.65kg

  What's in the box.
  1 x ECCO 3.5KW 24V 100A MPPT Hybrid Solar Inverter
  1 x User Manual

  • 1-Year Warranty

  • Ritar 25.6v 100ah Lithium LifePO4 2.56Kwh
    
    SAFETY
    + Prismatic LFePO4 cells, longer cycle life and much more safety.
    + Low voltage system, safety for application.
    + IEC62619, UI1973 certification for cell.
    UN38.3, MSDS certification for system.
    DESIGN
    Standard 19" rack design, support rack or wall mounted.
    Flexible and easily installation.
    + -20~+55°C widely temperature range.
    + Maintenance free.
    BATTERY MANAGEMENT SYSTEM (BMS)
    + Independent protection for charge and discharge.
    + Over charge protection, over discharge protection and over temperature, short circuit protection.
    
    

    Nominal voltage [V]	25.6
    Nominal capacity [Ah]	100
    Total energy [kWh]	2.56
    Max. charging current [A]	100
    Max. charging current [A]	29.2
    Charging voltage [V]	27.6-28.8
    Max. discharging current [A]	100
    End of discharge voltage [V] Product dimension [W*D*H]	442*300*110
    Product weight [kg]	23
    Protection class	IP20
    Operating humidity	0-95% RH (No condensing)
    Operating temperature range Communication interface	Standard Product: Charge: 0 ~ +55°C; Discharge: -20 ~ +55°C
    Cycle Life	6000
    Protection	OVP, LVP, OCP, OTP, LTP protection.
    Certification	UN38.3, MSDS, CE
    Series Support	No support.
    Parallel Support	Yes, Max 15pcs

    
    

    Battery Includes:

    -Bolts

    -Wall & Rack Brackets

    -Manual 

    -Communication Cable

    PRODUCT WARRANTY

    Ritar warranties that the Product retains either eighty percent (80%) of Usable.
    Energy for Five (5) years from the shipment date, or the Cycle Life ≥3000,
    whichever comes first.

    Warranties:
    All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.

  • 5 Years Warranty
    All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.